WiFiPOOL home automation concept - DEMONSTRATION VIDEO
WiFiPOOL: pool automation at your fingertips
How it works
- Measure
- Check
- Adjust
- Connect and backup
We have separate equipment for each function that communicates with each other via WiFi, Ethernet or RS485.
Below is an overview and further explanation.
We have two types of equipment
-
Measurements
Product rangeIncludes pH, RX, temperature, level and flow detection,
probes and boxesClick on the image for the catalogue
-
Control & adjustment
Product rangeIncludes peristaltic pumps, frequency regulators, WiFi plugs and 2- or 3-way flowvalves
Measurement: explained
Measurement modules allow you to measure various pool values.
You can read these values on your mobile phone and use them later to switch certain devices such as a filter pump/frequency converter, heat pump or chlorine dosing system on or off.
There are various measuring modules:
pH module: pH, flow and level
Redox module: Redox (chlorine), flow and level
TLF module: temperature (x2), flow and level.
Combined modules (Connect Go and Connect Pro) with pH, RX, Temp, level and flow measurements
Control and adjustment: explained
-
Wi-Fi plugs (sockets)
Product rangeWith WiFi sockets, you can switch most of your pool appliances on and off, regardless of the brand.
With a smart WiFi plug you can steer your filter pump (with or without our WiFi frequency converter), your heating, your salt electrolysis, etc. -
WiFiPOOL-app automation
Product rangeThe automation module of the WiFiPOOL-app allows you to control sockets and smart devices. For example:
- Start the circulation pump every day from 8:15 a.m. to 5:45 p.m. by reducing power consumption with the frequency converter .
- Start the peristaltic acid dosing pump if the pH is higher than 7.6 AND if the circulation pump is on
- Circulate the water to the solar heating when the roof temperature is higher than the water temperature AND the water is colder than 32°C.
-
Control and adjustment equipment
Product rangeThe in-app automation software is used for steering multiple adjustment devices, which you can purchase separately in our webshop.
RecommendationTo facilitate and speed up the installation of all necessary devices, we offer 100% pre-assembled treatment devices for:
- traditional pH and liquid chlorine water treatment &
- odour- and irritation-free pH and salt electrolysis water treatment
Dual connection and chip storage guarantee 24/7 monitoring
-
Product line 2025 – Added features
Since our recent upgrade in 2025, the WiFiPOOL controller operates via cable and Wi-Fi. The basis of this controller is the Gen 2 chipset, which allows you to control an entire pool.
The biggest advantage of this innovation is that the automation, regardless of whether it is factory-set or based on your individual requirements, is now also stored in the chip. If the WiFi connection fails, your water treatment will continue to run according to the parameters stored in the chip. An Ethernet cable connection is also available as an option to guarantee the connection, but the main advantage is that the initial configuration of the devices is quicker and easier via cable. Please contact us for more information about compatibility and new working methods.
Product range by application area
Interaction between equipment
Unique on the market
Control via app
The app becomes the central point of your pool control. You can see on a graph how quickly the pool has been heated by the solar heating, how well the pH is being controlled, and you will receive an alarm notification when the chlorine container is empty....
Android app
iOS app
The app is available for iOS and can be found under "WiFiPOOL".
You can also use the download below to open it directly in the App Store.
