This
box measuring 40x60x45cm contains an automatic water treatment device with
an EL salt electrolysis and pH neutraliser, high quality and at an
an unbeatable price. To make the electrolysis work, you need to add 4 g
salt per litre of water. The salt will be converted into chlorine,
which – after disinfection – will be converted back into salt.
The
Box has been developed for do-it-yourselfers with an above-ground swimming pool. Because
all components are already electrically wired and the pipes are glued,
the set is very easy to install: connect the inlet and outlet to
the 50 mm pipe, or to the supplied connections for Intex/Bestway with
32 or 38 mm or 2-inch thread.
The box contains a collection tray
for a 10-litre pH container (not included) and
mounting materials for floor, ground or lawn.
This package contains
a 'flow switch' that stops the dosing of pH when
there is no water flow. Level detection (not included) stops the
pH dosing when the acid tank is empty.
The
WiFiPOOL controller allows you to monitor the operation of the installation via
your telephone, wherever you are. The
WiFiPOOL controller works via cable or WiFi. The unit is expandable
3 temperature measurements, 3 level measurements, a pressure measurement and a
conductivity measurement (salt content measurement). In addition to pH control and
salt electrolysis, up to 2 other devices can be connected to the control box
. The
Connecting and configuring the WiFi equipment via the WiFiPOOL-app
is extremely simple and efficient. The entire automation strategy
is automatically loaded into the phone at the time of
installation.
As soon as
the water flows through the installation, the equipment measures the pH and
Redox (chlorine) and automatically adjusts the pool values. When used correctly
use, you can be 100% sure of clean and healthy water.
In addition, thanks to electrolysis, you have far fewer irritating products and less swimming pool odour.
In the box: Installation box with waterproof lid 40x60x45cm, collection tray for pH container 10 litres, WiFiPOOL Connect-pro control box with
salt electrolysis 20g/h with flow detection, peristaltic pH pump with
all connections, flow switch, earthing, pH and redox (chlorine) probes and
calibration solutions, 2 rubber couplings diameter 50mm.
This salt electrolysis is very similar to the Intex / Bestway salt electrolysis devices, but has a much greater capacity to produce chlorine. This device produces 20g/h of chlorine!
