Salt electrolysis HS DIY kit without pH and RX control

EC salt electrolysis is a high-quality salt electrolysis water treatment device at an incredible price. To make the electrolysis work, you must add 4 g of salt per litre of water. Salt is converted into chlorine, which – after disinfection – is converted back into salt.

Characteristic of the EC is its simplicity of installation and use. The control buttons are "intuitive" and the device is easy to install. Using our WiFiPOOL app and a Redox (chlorine) module, you can easily automate the device. Once the set point is reached, the app stops chlorine production. Note: every salt electrolysis device generates more pH during chlorine production, so the pH will rise and should be adjusted using a pH regulator. This can be done automatically via a pH control module.

Installing a “flow switch” (possible on the chlorine or pH module) will stop dosing in the absence of water flow. Level detection stops dosing of the pH neutraliser when the neutralisation tank is empty.

Thanks to electrolysis, you have far fewer irritating products and less pool odour. For this reason, salt electrolysis is still widely used in indoor pools.

2 versions available

• 16 g/hour disinfection: Pools up to 80 m³ *
• 20 g/hour disinfection: Pools up to 100 m³ *

* The definition of m³ for pool usability varies depending on usage and pool layout and ranges between 3 and 5 times the disinfection capacity (g/hour) of the electrolysis device.

EC salt electrolysis with transformer (and plug).