MaX Frequency Converter IP20 230V with WiFiPOOL CONNECT PRO controller - 1.12 kW (1.5 HP)

Earned back in 2 years. Calculate it here

Suitable for 230V pumps up to 1.5 hp – 1,120 W.

With a variable speed drive, you can reduce the speed of the filtration pump. This results in lower energy consumption, while filtration and cleaning perform better at lower flow rates.

Only starting the pump, backwashing, and cleaning/vacuuming require full pump power! Filtration pumps are the biggest energy consumers in swimming pools.

With this plug-and-play frequency controller, no programming is required.
As soon as the filtration pump is started via the WiFiPOOL app, manually or automatically, the pump runs at full speed (2900 rpm) for 1 minute and then returns to the last used setting.
To adjust the controller speed, press the [UP] or [DOWN] button.

With this control system, you can easily reduce consumption by 50%, and the frequency controller typically pays for itself within one year. Using this controller, you can adjust the filtration pump frequency via Wi-Fi using your mobile phone and monitor power consumption directly on your phone screen.

Because advanced programming is handled via WiFi, it is perfectly possible to increase the frequency while, for example, adding chlorine to the pool, improving the mixing of chemicals and preventing overdosing.

The Connect PRO control module, which sends instructions from the mobile phone to the frequency controller, also includes connections for flow detection and two inputs for our temperature sensors.
Two signals that further enhance the safety and efficiency of the MaX frequency controller.

To set up a time schedule, you can also use the included WIFIPOOL Connect PRO, which connects to our free WiFiPOOL app.
No need for additional timers, neither analogue nor digital.

The core of this device is the WiFiPOOL Gen-2 circuit board, which allows you to control all aspects of a swimming pool.
With this board, the following measurements can be performed at any time:

• pH, RX (chlorine),
• flow,
• level (at 3 measurement points),
• temperature (at 3 measurement points),
• pressure and conductivity (salt level).

In addition, up to 4 control devices can be connected (frequency controller, peristaltic pumps, salt electrolysis, UV lamp, automatic valve, ...).

In addition to a WiFi transmitter, the board also includes an Ethernet connection, ensuring faster initial configuration and a stable continuous connection.
The WiFiPOOL app is designed to recognise pool automation functions already programmed in BENIFERRO peripheral equipment.
In other words, even without knowledge of pool chemistry, after an initial circulation cycle you can safely and confidently enjoy your pool.

Simply connect the filtration pump to the socket of the frequency controller. Then connect the WiFiPOOL Connect PRO to the app according to the included manual.

Warning:: Never connect any device other than a 230V filtration pump to the frequency controller.

• 230V frequency controller with European plug and socket (length 1 m)
• WiFiPOOL Connect PRO control module
• Wall mounting plate
• Comprehensive installation and configuration manual