Salt electrolysis HS DIY kit with pH and RX control - pool up to 100 m³

This DIY kit includes an automatic water treatment device with a high-salt (HS) salt electrolysis unit and pH neutraliser, of high quality and unmatched price.
To make the electrolysis work, you need to add 4 g of salt per litre of water. The salt will be converted into chlorine, which – after disinfection – will be converted back into salt.
The kit is designed for pool DIY enthusiasts. Since all components are already electrically wired, the set is very easy to install.

There are 2 versions available

• Disinfection of 16 g/hour: Pools up to 80 m³ *
• Disinfection of 20 g/hour: Pools up to 100 m³ *

* The definition of m³ for pool usability varies depending on usage and pool layout, and is 3 to 5 times the disinfection capacity (g/hour) of the electrolysis unit.

This DIY kit includes a “flow switch” that stops dosing pH in the absence of water flow. Level detection stops pH dosing when the acid tank is empty.

Once the water passes through the measuring/dosing nipple, the equipment measures pH and Redox (chlorine) and automatically adjusts the pool values. When used correctly, you are 100% sure of clean and healthy water.

The WiFiPOOL controller ensures you can set up and monitor the system’s operation via your phone, wherever you are. It works both via cable or WiFi.

The unit is expandable with:

• 3 temperature measurements,
• 3 level measurements,
• 1 pressure measurement,
• 1 conductivity measurement (salt content).
• Besides the pH control and salt electrolysis, two other devices can be connected to the control box.

Pairing and configuring the WiFi equipment via the WiFiPOOL app is extremely straightforward and efficient. The entire automation strategy is automatically loaded onto the phone during installation.

In short: With this device, you gradually build a complete home automation system without extra investment in control equipment.

• Thanks to the precise salt electrolysis treatment, your pool contains far fewer irritating substances and chlorine odour.
• The swimming water is in optimal condition 24/7 and 100% germ-free.
• There is no storage of hazardous chemicals that could accidentally come into contact with small children – very safe indeed.
• There is no need for frequent replenishment as with traditional chlorine treatments. The salt concentration remains almost constant.

If used correctly, you can completely rely on pure and healthy water. Moreover, thanks to electrolysis, you experience far fewer irritating substances and less pool odour.

• WiFiPOOL Connect-pro control box
• Salt electrolysis 20g/h with flow detection
• Peristaltic pH pump with all connections
• Flow switch
• Level detector for acid tank
• Earthing
• pH and Redox (Chlorine) probes
• Calibration liquids
• 2 rubber connectors diameter 50mm.
  For connection to 32 or 38 mm Intex | Bestway or 2 inch thread, contact us via chat or at info@zwembad.co
  

For purchasing suitable quality salt, we recommend our main supplier’s distributors at BENIFERRO.EU.