Measurement and injection tube 50 mm with 4 holes 1 1/2 inch with connection 3/4" flow switch + cap 3/4 inch

This measurement and injection tube is ideal for use in water treatment.

• When using liquid chlorine and pH, you have two connections for pH and Redox probes, one connection for flow switch (3/4 inch) and two connections for the injection nipples.
• For salt electrolysis in combination with liquid pH, you have two connections for pH and Redox probes, one connection for flow switch (3/4 inch), one connection for the injection nipple and one connection for earthing.

Warning: when using this injection tube, you need a system in which liquid acid and liquid chlorine cannot be added at the same time. For salt electrolysis, electrolysis and acid addition must also not occur simultaneously.

The holes in the tube can be sealed with a 3/4 inch cap for the external thread flow switch connection, or with the combination of a probe swivel + fake probe for the 1/2 inch internal thread probe / injection holes.

The PVC tube has a diameter of 50 mm and can be glued. Connection via 50 mm rubber straight connections or elbows is also possible. The tube is 32 cm long. In the box: measurement and injection tube with sealing cap to close the flow switch connection.