Flow switch with waterproof Higo connector

A flow switch can be used to detect the presence of flow. The flow switch must be placed horizontally in a pipe and, depending on the depth at which it is located in the pipe, is activated at a flow rate of approximately 2m³/h.The flow switch connection is 3/4 inch female. Inside the flow switch is a rubber seal. The dimensions of the spoon are 71x11.5mm. The contact is "normally open". Maximum operating temperature is 85°C. The flow switch can be installed in a 50 or 63 mm pipe using a tapping saddle.Our measurement and injection tube comes standard with a 3/4 inch connection for the flow switch. This flow switch has a Higo connector and fits all our WiFi devices with a flow switch connection. Flow switches with a two-wire end are also available.