Level controller for chlorine|acid|base tank with waterproof Higo connector 5M

This level controller with a waterproof HIGO connector can be used in pond and pool water as well as for liquid pH- (15% sulfuric acid), liquid pH+ (30% sodium hydroxide), and liquid chlorine (15% sodium hypochlorite).

The most common application for this flow switch in combination with our WiFi devices is to stop a dosing device when the supply tank of liquid pH-, pH+, or chlorine is empty.

The level controller is housed inside a 2 cm diameter, 50 cm long tube containing resin so that the controller does not come into contact with the chemical.
The level switch itself measures 55x22mm, the contact is "normally open," but the signal can be inverted by loosening and rotating the float 180°.

We offer 2 versions:

• 33 cm length for a 5L buffer tank
• 50 cm length for a 20L buffer tank

Maximum operating temperature 85°C.

This level switch with Higo connector fits all our WiFiPOOL devices with level measurement.
We also have level controllers with two-wire connection.