Salt electrolysis EL chlorine generator - DIY kit with pH and RX control

This DIY kit contains an automatic water treatment device with HS salt electrolysis and pH neutraliser, offering high quality at an unbeatable price. To activate the electrolysis, add 4 g of salt per litre of water. The salt will be converted into chlorine, which – after disinfection – will be converted back into salt.

The kit has been developed for do-it-yourselfers with a pool. Because all components are already electrically wired, the kit is very easy to install.

This DIY kit includes a "flow switch" that stops the dosing of pH when there is no water flow. Level detection (not included) stops the dosing of pH when the acid tank is empty. The controller with display and buttons ensures that the pH and Redox (chlorine content) are seamlessly regulated.The entire automation strategy is already configured, so you don't have to set it up yourself. As soon as water flows through the system, the equipment measures the pH and Redox (chlorine) and automatically adjusts the pool values. When used correctly, you can be 100% sure of clean and healthy water.gt;In addition, thanks to electrolysis, you have far fewer irritating products and less pool odour.

In the box: pH and RX control box with display and buttons, salt electrolysis 20g/h with flow detection, peristaltic pH pump with all connections, flow switch, earthing, pH and redox (chlorine) probes and calibration solutions, 2 rubber couplings diameter 50mm. This salt electrolysis is very similar to the Intex / Bestway salt electrolysis devices, but has a much greater capacity to produce chlorine. This device produces 20g/h of chlorine!