WiFi-controlled frequency converter IP20 230V - 1.12 kW (1.5 HP)

Recouped in 1 year

Suitable for 230V pumps up to 1.5 hp - 1,120 W.

A variable speed drive allows you to slow down the speed of the filter pump. This means lower energy consumption, while filtration and cleaning work better at lower flow rates.

Only starting the pump, backwashing and cleaning/suction require the full power of the pump! Filter pumps are the biggest energy consumers in pools. With this plug-and-play frequency converter, you don't need to program anything. As soon as you plug it in, the pump starts at full speed (2900 rpm) for 1 minute and then returns to the last setting used. To adjust the speed of the controller, press the [UP] or [DOWN] button. You cannot program the variable speed of the WiFiPOOL yourself. More information below.

To set a timer control, you can use a Standard timer or the supplied WiFiPOOL Smart Plug.

This control system allows you to easily reduce consumption by 50%, and the frequency control usually pays for itself within a year. With this controller, you can use Wi-Fi to control the frequency of the filter pump with your mobile phone and monitor power consumption on your phone's screen.

Because programming is done via WiFi, it is entirely possible to increase the frequency while, for example, chlorine is being added to the pool, in order to improve the mixing of the chemicals and thus prevent overdosing.
The 0-10 volt control module, which sends steering instructions from the mobile phone to the frequency converter, also contains the connections for detecting a current and two inputs for our temperature sensors.

It is sufficient to connect the filter pump to the plug of the frequency converter. Please note: Never connect any product other than a 230 V filter pump to the frequency converter.

• 230V frequency converter with European plug and socket (length 1 m)
• 10A smart WiFi plug
• Wall mounting plate
• Manual.
• Plug with timer not included.