WiFiPOOL connect PRO water treatment measuring box salt electrolysis (pH-RX-Flow) incl. measuring and installation materials, expandable to pH and salt electrolysis control

With the "Wifipool connect GO salt electrolysis" pH - RX - Level x2 - Flow" measurement box, you can take the necessary measurements to check the quality of your water using the WiFiPOOL-app. You can view the values of your pool on your phone. The data is transmitted continuously, 24/7.The only difference with the WiFiPOOL connect GO measuring box is that this kit contains an RX (chlorine) probe, which is suitable for salt electrolysis.
By purchasing a peristaltic pump/salt electrolysis and our smart plugs, you can automatically regulate the pH or chlorine. You can order these separately or order our measurement + control kit. pH and Redox probes are connected to the standard "BNC" connection. Level probes are used to monitor the contents of chlorine barrels and pH regulators. These probes, as well as the flow switch, are connected with waterproof connectors. Everything you need for pH and RX measurement is included in the box. Level and flow switches must be purchased separately. The WiFiPOOL-app is available for Android and iOS. Installing the equipment is very easy by scanning the barcode on the box. Box contents: WiFiPOOL connect GO box, pH probe, RX probe (gold - suitable for Salt electrolysis), threaded saddles and glands for installing probes, calibration fluids and 5V adapter.Manual - Quick start guide - YouTube - Brochures - Spare parts
The basis of this device is the WiFiPOOL Gen 2 circuit board, which allows you to steer an entire pool. With this circuit board, it is always possible to measure the following parameters: pH, RX (chlorine), flow, level (x3), temperature (x3), pressure and conductivity (salt content) measurements. In addition, four control devices (Frequency regulators, peristaltic pumps, Salt electrolysis, UV lamp, automatic valve, etc.) can be connected. The circuit board has a connection for an internet cable (Ethernet cable), which can be used instead of a Wi-Fi signal. The WiFiPOOL-app is designed in such a way that the necessary automation for steering your pool can be entered at the factory. Thanks to the Ethernet connection, the device can be easily, quickly and flawlessly connected to your home Wi-Fi network and to your phone.